- 1). Lay the 6-inch block on a flat surface.
- 2). Glue the clothespin lengthwise in the center of the wood block.
- 3). Allow time for the glue to completely dry. Glue the 1-inch cube to the tip of the open end of the clothespin. Be sure to glue only half of the cube onto the end of the clothespin.
- 4). Allow time for the glue to dry. Glue the flat side of the Popsicle stick to the top surface of the cube, leaving about 2/3 of the stick free. Be sure the stick is securely attached to the wood cube.
- 5). Glue the small container to the end of the Popsicle stick, leaving enough room when you push down to launch the egg.
SHARE