- 1). Place spool of thread on spindle at top left. Pull thread across to the right, pressing against bottom front of wire ring. Thread should now be going through the ring. Wind thread around tension guide at top right, placing thread between the two metal pieces.
- 2). Push the bobbin lever back, wind thread clockwise on bobbin shaft to secure end, place bobbin on bobbin spindle (front left spindle) and pull the bobbin lever forward.
- 3). Push the green button at the bottom right. Thread should begin winding onto the bobbin at this point. When bobbin is full, winder will automatically stop. If you need to stop the winder before bobbin is full, push the bobbin lever to the back position.
- 4). Clip thread near bobbin, place full bobbin on bobbin storage spindle and repeat steps to wind another.
SHARE
