- 1). Soak a clean cloth in naptha lighter fluid.
- 2). Rub the cloth over the shower walls and the top of the side of the bathtub. Be careful to rub the grout and the areas around it. Work until the area is completely clean.
- 3). Peel the adhesive tape off the bottom of the shower guard and press it against the top of the bathtub so that the corner of the splash guard meets where the wall meets the bathtub.
- 4). Peel the adhesive tape off the long side of the shower guard and press it against the shower walls.
- 5). Press the shower guard again and let it cure for at least 24 hours before using the shower.
- 6). Repeat the process at the other end of the bathtub, if needed.
SHARE
