- 1). Clean the treated plywood. It is important for this surface to be clean and completely dry for the double-sided tape to adhere correctly.
- 2). Place the double-sided tape around the perimeter of the deck surface. Peel back one side of the double-sided tape to secure it to the treated plywood. Be sure to press the tape solidly to the plywood to ensure a good seal.
- 3). Roll the carpet out to cover the deck area.
- 4). Pull back one side of the carpet to allow yourself to remove the backing from the double-sided tape. Place the carpet carefully and evenly onto the tape. Work from one corner to the other, pulling the carpet tight to avoid bubbles and wrinkles.
- 5). Repeat step 4 until all sides of the carpeting have been secured by the tape.
- 6). Press the carpet into the tape on all sides to be sure it is securely in place.
- 7). Cut away the excess carpeting, trying to leave the edge of the carpet even with the edge of the deck.
SHARE
