- 1). Attach the coaxial cable from the satellite source signal to the "Coax In" jack on the back of the Viewsat receiver.
- 2). Insert the yellow, white and red plugs on one end of the AV cables into the matching "AV Out" jacks on the Viewsat receiver.
- 3). Plug the other ends of the cables into the "AV In" jacks on the TV.
- 4). Plug the Viewsat receiver's power cord into an outlet and turn on the equipment.
- 5). Press the "Input" button repeatedly on the TV's remote control until the Viewsat signal appears on the screen.
SHARE
