- 1). Connect the coaxial cable from the satellite receiver to the RF IN or ANT IN jack on the converter box. The cable secures to the jack by turning the coupler on the end of the cable clockwise. If the cable is attached to the TV, unscrew the coupler from the TV and reconnect to the converter box.
- 2). Connect a second coaxial cable from the OUT to TV jack on the converter box to the RF IN or ANT IN jack on the back of the TV.
- 3). Plug the equipment into a wall outlet and turn on the satellite receiver, the converter box and the TV.
- 4). Press the "Scan" or "Auto-Tune" button on the converter box front panel or remote control to program all available satellite TV channels.
- 5). Set the TV on channel 3 or 4, then use the converter box remote control to change channels.
SHARE
