- 1). Measure the length of the edge of the beaded tablecloth. Transfer the measurement to the wall and mark the two ends with a pencil. Make marks every 24 inches within that measured space.
- 2). Cut a tape of self-adhesive, hook-pile tape into 1-inch sections. Remove the adhesive backing on the hook sections and press one piece into the wall at the places you marked.
- 3). Remove the backing on the pile sections of the tape. Press one piece of the pile section of the tape into the back of the beaded tablecloth every 24 inches, along the top edge.
- 4). Hold the beaded tablecloth up against the wall. Press the sections of pile tape on the back of the tablecloth into the corresponding piece of hook tape on the wall. The tablecloth will hang securely.
SHARE
