- The Canon IR 5000 has a laser dry electrostatic transfer imaging system, and employs a heat roller fixing system. It is equipped with 128 megabytes of RAM and has a hard disk capacity of 5.1 gigabytes. It has a first copy time of 3.8 seconds at the most, and possesses a warm up time of five minutes or less. It provides a zoom capability from 25 percent up to 400 percent, with 1 percent increments. It can be loaded with paper copy from A5 to A3 page sizes.
- The IR 5000 can output a maximum of 50 pages per minute. It has 100 available mailboxes, and a "Scan Once Print Many" feature. In addition, it has the following features: job build, reserve jobs, and job notification. It comes with a hard disk with a capacity of 5.1 GB, and a "Remote User Interface" feature.
- The IR 5000 provides 256-level grayscale support. The printer incorporates image enhancement technologies to achieve a printing resolution of up to 2400 by 600 dpi. In addition, it possesses a scanning resolution of 600 by 600 dpi, and a copying resolution up to 1200 by 600 dpi.
- The IR 5000 can be configured to only operate with the output tray, and when the printer is set to this mode, the image memory enables convenient electronic collation, with cross collated sets. In addition, a Finisher F1 can be selected, which offers a high-output capacity up to 2,000 sheets. It can be set to either grouped, sorted, or stapled modes -- and up to fifty sheets can be stapled in single sets.
- The IR 5000 has a width of 643 mm, a depth of 743 mm, and a height of 1,136 mm. In addition, it possesses a net weight of 210 kg.
- The IR 5000 can be augmented with the following accessories: Finisher F1, Saddle Finisher F2, Shift Tray B1, Puncher Unit A1/C1/D, Side Paper Deck G1, Document Tray C1, Control Card, and PS/PCL Network Printer Kit A1.
General Specs
Printing Specs
Image Quality
Finishing Specs
Dimensions and Weight Specs
Available Accessories
SHARE