- 1). Fill a bucket with warm water and mix in three drops of liquid dish soap. Dip a sponge in the liquid and wipe down the surface thoroughly. Rinse with warm water and use a squeegee to remove all the water from the walls.
- 2). Add ammonia to a bucket of warm water to reduce streaking if the soapy water was not enough to get the surround clean. Wipe the walls vertically from top to bottom with the sponge. Apply a warm water rinse and squeegee the walls to remove excess water.
- 3). Remove mold or mildew on the Corian surround with bleach. Fill a spray bottle with 1 cup bleach and 2 cups water and spray areas with evident mold or mildew. Rub the sprayed surround with a clean cloth to work the bleach into the surround. Rinse with warm water and squeegee away the water.
- 4). Fill a bucket with 1 cup lime-scale remover and 4 cups warm water to remove hard water stains due to mineral buildup. Dip a sponge in the solution and gently rub the sponge down from the top of the stain to the bottom. Repeat until the buildup is completely removed. Rinse and squeegee the walls clean.
- 5). Buff the surround walls with a clean cloth. Work in small circular patterns from the top of the surround to the bottom to get a shine on the surface.
SHARE
