- 1). Label an empty gallon jug "Bleach Sanitizing Solution" and fill the container with warm tap water, but leave an inch or two of headspace above the water to allow the bleach to be added and the solution to be mixed.
- 2). Measure 1 tsp. of bleach and add it to the warm water. This will result in a sanitizing solution of 200 ppm bleach. Cap the jug and, holding one hand over the cap, shake the jug four or five times in an up-and-down motion to mix the solution.
- 3). Transfer the solution to a spray bottle for convenience. Apply this solution liberally to surfaces being sanitized. Scrub with surfaces with a sponge or rag soaked in sanitizing solution, but allow the surfaces to air dry.
SHARE