- 1). Remove the coaxial cable running from the satellite dish to your satellite receiver.
- 2). Run the coaxial cable from your satellite dish's LNB feed to the "ANT IN" or "LNB IN" port on the multi-switch.
- 3). Connect the other coaxial cable to one of the "To Receiver" jacks on multi-switch.
- 4). Fasten the other side of the coaxial cable to the "LNB IN" jack on the rear of your TV's set-top box.
- 5). Connect another coaxial cable to an open "To Receiver" jack on the multiswitch. Fasten the opposite side of the coaxial cable to the "LNB IN" jack on the second satellite set-top box.
SHARE
