USB Microphone

• 1). Locate an open USB port on your computer or hub if you are using one.
  
  
• 2). Plug the USB cable into the USB port. The computer will automatically recognize the microphone and will install the drivers.
  
  
• 3). Right-click on the speaker icon next to your clock on the Task Bar. Select "Recording Devices."
  
  
• 4). Right-click on the newly installed microphone in the "Recording Devices" window and click "Enable." If the only option is "Disable" then the microphone is already enabled and you can close the window. The microphone is now installed and ready for use.
  
  

Analog Microphone

• 1). Located the microphone jack on your computer. It will be the same size as the headphone jack, and will typically be located next it.
  
  
• 2). Plug the analog input into the microphone jack.
  
  
• 3). Right-click on the speaker icon next to your clock on the Task Bar. Select "Recording Devices."
  
  
• 4). Right-click on the newly installed microphone in the "Recording Devices" window and click "Enable." If the only option is "Disable" then the microphone is already enabled and you can close the window. The microphone is now installed and ready for use.