- 1). Lay out the cable and attach the fasteners for the antenna end only.
- 2). Attach the cable to the antenna connection with the fasteners and tape or tie the wire securely to the mast to keep it from blowing in the wind.
- 3). Use the drive-in cable clips to attach the cable to the fascia or roof edge.
- 4). Secure the cable to the wall, all the way to the wall tube, with the cable clips.
- 5). Run the cable to the wall and over to where your TV will sit.
- 6). Install your connector to the cable after you have installed the caps and sealed the wall tube with silicone.
- 7). Turn your TV on and adjust your antenna.
SHARE
