- 1). Press the power switch to "off" on the right headphone. The right side will have a small "R" near the headphone on the headband.
- 2). Rotate the right headphone so that the headband connector is away from the top of the headphone.
- 3). Grip the very top of the headphone with your fingers and pull straight up. The battery will slide out.
- 4). Insert a new battery, or replace the same one after it has charged, by sliding it straight down into the battery cavity.
- 1). Hold the Quiet Comfort 15 in front of you, so that the right earcup is to your right and the left earcup is to your left.
- 2). Rotate the right earcup in a little, so that the top of the earcup is away from the headband support structure.
- 3). Pry open the small plastic flap located on the front edge of the ear cup, just above where the headband connects to the earcup.
- 4). Tilt the headphone over and the battery will fall out of the compartment that was covered by the plastic flap.
- 5). Insert a new AAA battery into the compartment with the positive terminal facing down. Close the flap to secure the battery.
QuietComfort 3
QuietComfort 15
SHARE