Specs for the Sanyo Flat Screen TV Model DS32424

Size Specifications

The Sanyo DS32424 has physical dimensions of 30.2 inches wide by 28.8 inches high by 22.7 inches thick. In comparison to more modern plasma and LCD TVs, which can have thicknesses of under 4 inches, the DS32424 is quite bulky. The diagonal screen size of the DS32424, as measured from the bottom corner of the screen to an upper corner on the opposite side, is 32 inches. And while modern 32-inches TVs can weigh less than 50 lbs., the DS32424 weighs 136.6 lbs.

Picture resolution refers to how many lines of pixels -- or tiny squares of illumination -- a TV can display. Higher resolutions correlate to greater levels of on-screen detail or sharpness. The Sanyo DS32424 has a native picture resolution of 330 lines of pixels, which is the maximum amount of lines of pixels the TV can display. However, the DS32424 can accept video inputs with up to 800 lines of pixels. Modern high-definition (HD) TVs, in comparison, have picture resolutions of 1,080 lines.

The internal power supply of the Sanyo DS32424 requires an alternating current (AC) of 120 Volts (V), 60 Hertz (Hz) in order to operate. During normal operation, the DS32424 consumes power at a rate of 100 watts (W) or 100 joules per second.

The Sanyo DS32424 uses two speakers of approximately 3.9 inches (10 cm) in diameter. The TV utilizes a built-in amplifier.

The Sanyo DS32424 has several inputs and outputs for attaching external devices. These include one video input, two audio inputs, two S-video inputs, one fixed RCA audio output, one variable RCA audio output, one Y, Pb, Pr-R/L component audio/video (AV) input and one 75-ohm ultra high frequency (UHF), very high frequency (VHF) and cable television (CATV) antenna input.

For receiving television broadcast signals, the Sanyo DS32424 utilizes a 181-channel tuning system. This tuning system can supply channels 2 through 13 using UVF, channels 14 through 69 using UHF and channels 1 as well as 14 through 125 using CATV.