- 1). Connect one set of stereo cables to the left and right output jacks on the rear of the equalizer, then hook up the other ends to the Tape 2 Monitor Playback input jacks on the back of the amp or receiver. Match the white plug to the left jack and the red plug to the right jack. Jacks are typically color-coded to match the plugs.
- 2). Insert the plugs on a second set of stereo cables into the input jacks on the equalizer and connect the other ends to the Tape 2 Monitor REC (record) jacks on the amp or receiver.
- 3). Connect a third set of stereo cables from the input (record) jacks on the tape deck to the output jacks for Tape 1 on the back of the amp or receiver. Connect the fourth set of stereo cables from the tape deck's output (playback) jacks to the Tape 1 input jacks on the amp or receiver.
- 4). Connect the last set of stereo cables from the white and red audio output jacks on the rear of the CD player to the jacks labeled for a CD player on the back of the amp or receiver.
- 5). Press the Tape Monitor button on the front of the amp or receiver to activate the equalizer for use with the other components you connected to the amp or receiver.
SHARE
