- 1). Remove the screw that's holding the cover clip in place with the supplied wrench. It's the screw on the leading edge of the black piece that holds the cover in place. Rotate the cover to the rear.
- 2). Press the arbor lock which is the button between the handle and blade cover. Then turn the screw at the back of the blade housing clockwise and remove it, the outside blade flange and the blade. Leave the inside blade flange in place.
- 3). Attach the new blade making sure that the teeth point downwards. Replace the outside blade flange and arbor screw---the one from the back of the blade housing. Then press the arbor lock and use the supplied wrench to tighten the arbor screw. Turn the wrench counterclockwise. Replace the screw and cover from the first step.
SHARE