- 1). Disconnect the two audio cables from the back of the speaker cabinet. Relocate the speaker assembly to a flat surface.
- 2). Place the speaker cabinet with the top side down so the base of the cabinet is facing upward. Have an assistant hold the cabinet in place.
- 3). Remove the four feet from the base of the speaker cabinet. Tighten a pair of vice grips around one of the feet. Rotate the vice grips in the counterclockwise direction until the foot comes loose from the screw hole in the cabinet. Repeat this to remove all four feet.
- 4). Insert a new foot into one of the holes on the base of the cabinet. Thread the new foot into the screw hole and hand-tighten the foot until it is firmly secured to the cabinet's base. Repeat this to install the remaining three feet.
- 5). Place the cabinet right-side up on the ground to test the stability of the new feet.
SHARE
