- 1). Press the end of a flat head screwdriver into the notches on the two rear roof rail covers to unlock them from the roof rails.
- 2). Lift the rear roof rail covers up and off of the rails.
- 3). Slide the crossbars into the roof rails, aligning the mark on the crossbars with the identical mark on the top of the roof rails. Position the crossbars so the adjusting screws are on the passenger's side.
- 4). Tighten the four thumb-wheel screws on each crossbar with a T-30 Torx driver to secure them to the rails.
- 5). Reposition the roof rail covers. Press down on the covers until they snap into place on the rails.
SHARE
