- 1). Open the power box, and run the black wire from the control to the box, and insert it into its left receptacle below the "A" symbol of the box.
- 2). Thread the control's middle wire to the power box, and connect it to its left receptacle below the "B" symbol of the box.
- 3). Insert the control's red wire into its left receptacle, located below the "C" symbol of the power box; the control is now powered through the box. Close the box.
- 4). Set the timer on the power box to the times you want the lights to go on and off each day; for example, if you want the lights to go on 6 a.m. and turn off at 9 p.m., enter those times into the timer.
- 5). Adjust the control's settings when necessary with the power box timer.
SHARE
