- 1). Place a level on top the washer to determine which corner or corners are not level with the others. Grip the top of the washer and shake it to feel where the uneven legs are.
- 2). Place a small wooden block under the front or rear of the washer to prop the appliance while you work on it.
- 3). Turn the locknut on the uneven foot or feet clockwise until it reaches the base of the foot.
- 4). Use a 5/8-inch open wrench to turn the leveling feet that must be adjusted. Turn the leveling feet clockwise if you want to shorten the feet or counter-clockwise to lengthen them.
- 5). Turn the locknuts counter-clockwise until they are flat against the bottom of the washing machine. This locks the feet into place so that they do not move and become uneven again.
SHARE
