- 1). Pop the hood on the Colorado, and locate the throttle body.
- 2). Disconnect the black plastic tube that runs from the air filter to the throttle body, using a flat-head screwdriver to unscrew the hose clamp that secures the tubing to the throttle body. Then pull off the plastic tubing.
- 3). Place a shop rag underneath the throttle body to catch any excess cleaner. Take the can of throttle body cleaner and insert the included straw into the end of the nozzle. Point the straw into the throttle body, and lightly spray the cleaner. Hold down the nozzle only in short bursts.
- 4). Hold open the butterfly on the throttle body by pulling back the throttle body linkage, opening up the passageway to the engine. Lightly spray the throttle body cleaner into the throttle body in short bursts.
- 5). Wipe off any excess cleaner with the shop rag, and clean any painted surfaces, if any, that the spray contacted. Reinstall the black plastic tubing with the flat-head screwdriver.
SHARE
