- 1). Set the pool filter to the waste or drain setting and lower the water level to a point 12 inches below the skimmer line. Alternatively, use a sump pump to lower the water level if the appropriate filter settings are not available.
- 2). Remove the basket from the skimmer interior. Unscrew any plugs or caps installed at the bottom of the skimmer by hand. Manually unscrew any jet fittings installed on the pool return lines or use a pair of pliers if they do not move easily.
- 3). Unhook the pool pump from the pool plumbing. Unscrew the filter drain cap manually and let it drain.
- 4). Hook up a shop vacuum and insert the hose into the skimmer hole. Set the vacuum to the "Blow" setting and run it. Run the vacuum until all of the water inside the pool lines is blown out.
SHARE
