Jeep Cherokee Bumper Removal

Front Bumper

1). Slide under the front of your Jeep and locate the mounts where the bumper and frame rails meet. There are two side plates, one on the each side of the frame, with three bolts securing them to the frame.
2). Loosen the three bolts on both sides of the Jeep with a socket and ratchet. Remove two on each side but leave one in place so the bumper does not fall.
3). Remove the last two bolts, while supporting the bumper. Pull the bumper straight off the front off the Jeep. On older models, there may be a vacuum line attached to a ball on the inside of the bumper. Pull the line off when you remove the bumper.

1). Open the lift gate on the rear of your Jeep Cherokee then slide under the rear bumper of the Jeep. Locate the bumper mounts on the body of the Jeep; there are four bolts on each mounts that thread into the body.
2). Remove three of the four bolts from each mount using a socket and ratchet. Leave one bolt on each mount to keep the bumper from falling on you.
3). Remove the final bolt on one side with a socket and ratchet while supporting the bumper. Slide to the opposite mount and remove the final bolt there as well.
4). Pull the bumper straight off the rear of the Jeep. Set the bumper aside and close the rear lift gate.