- 1). Take the cushion part of the seat off. Look for a release bolt or screw, loosen and then remove the cushion.
- 2). Look for two bolts holding the primary rider seat in place. Use an Allen wrench if necessary to remove these two bolts.
- 3). Identify any plastic plates that hold the primary seat in place. You need to locate the nuts and loosen them. The plastic plate you are looking for is the mounting plate for the seat.
- 4). Slide the plate forward to lower the seat and slide it backward to raise the seat. Tighten the nuts in the new position, securing the plastic plate. Reattach the primary seat, the cushion and you're finished.
SHARE
