Plasterwork is the ornamentation or construction done with the use of plaster.
This is usually seen as layers of plasters over an interior wall.
It can also be plaster decorative moldings over walls or ceilings.
The process of plastering or pargeting has been commonly utilized in building construction projects for centuries.
It describes the type of material spread on the surfaces of coarse and irregular textured walls, ceilings and columns in order to provide a hard, smooth and leveled finish.
Later on, these are often time painted for a good appearance or stylish appeal.
Many regard plasterwork as a unique skill.
It features a great ceiling decorating option.
To achieve this, here are a few easy steps: Step 1 - Plaster the wall.
Step 2 - Level it and try to achieve even finishing.
Step 3 - Use plasterboards as the sub-base for the partition walls or ceilings.
You will need a rigid and adequate frame from timber battens for this.
Step 4 - Fix the runner boards from the spare lengths.
This is to harden the ceiling area side by side.
This also provides easy access along the roof void and it can even support electrical cables.
If you want to achieve that whole Victorian touch in your ceiling decorating task, you can include plaster trims, friezes and medallions over your ceiling.
There are precast or plastic plaster materials readily available in the market.
You can also make your own decorative piece with plaster of Paris.
The good ones are those that dry hard but are still relatively lightweight.
Before making your moldings, first decide on the design you plan to use.
Then, be ready with your molds.
Your plasterwork should not be more than 8 to 10 inches across and they should not be deeper than 1 to 2 inches.
This is because heavier plasters will be harder to secure on the ceiling.
You can also make one big design but you need to make use of many small pieces that are line up next to one another.
When it comes to making the friezes, you need to mix the plaster of Paris into a bucket.
Then, use a spray bottle in spraying mineral oil over the inner sides of your molds.
Spray light, even coats.
Next, place them over some newspapers with the open side facing up.
After doing so, pour the plaster in the molds carefully.
Also mound them a little by the top portion.
Afterward, run a straightedge or board over them to ensure that the surface is completely flat.
Allow drying and setting of the plasterwork.
This is usually seen as layers of plasters over an interior wall.
It can also be plaster decorative moldings over walls or ceilings.
The process of plastering or pargeting has been commonly utilized in building construction projects for centuries.
It describes the type of material spread on the surfaces of coarse and irregular textured walls, ceilings and columns in order to provide a hard, smooth and leveled finish.
Later on, these are often time painted for a good appearance or stylish appeal.
Many regard plasterwork as a unique skill.
It features a great ceiling decorating option.
To achieve this, here are a few easy steps: Step 1 - Plaster the wall.
Step 2 - Level it and try to achieve even finishing.
Step 3 - Use plasterboards as the sub-base for the partition walls or ceilings.
You will need a rigid and adequate frame from timber battens for this.
Step 4 - Fix the runner boards from the spare lengths.
This is to harden the ceiling area side by side.
This also provides easy access along the roof void and it can even support electrical cables.
If you want to achieve that whole Victorian touch in your ceiling decorating task, you can include plaster trims, friezes and medallions over your ceiling.
There are precast or plastic plaster materials readily available in the market.
You can also make your own decorative piece with plaster of Paris.
The good ones are those that dry hard but are still relatively lightweight.
Before making your moldings, first decide on the design you plan to use.
Then, be ready with your molds.
Your plasterwork should not be more than 8 to 10 inches across and they should not be deeper than 1 to 2 inches.
This is because heavier plasters will be harder to secure on the ceiling.
You can also make one big design but you need to make use of many small pieces that are line up next to one another.
When it comes to making the friezes, you need to mix the plaster of Paris into a bucket.
Then, use a spray bottle in spraying mineral oil over the inner sides of your molds.
Spray light, even coats.
Next, place them over some newspapers with the open side facing up.
After doing so, pour the plaster in the molds carefully.
Also mound them a little by the top portion.
Afterward, run a straightedge or board over them to ensure that the surface is completely flat.
Allow drying and setting of the plasterwork.
SHARE
