- 1). Set the miter saw on "zero degrees" as you do when making squared cuts. Measure and cut a piece of 3/4-inch by 3 1/2-inch MDF particle board 36 inches long. This is the fence extension.
- 2). Place the extension on its edge atop the miter saw table. Ensure it is against the face of the fence. Center the piece each way.
- 3). Secure the extension to the fence, near each end, using a 3-inch C-clamp. Ensure each clamp fits over the top edge of the extension, with the circular button far enough onto the face of the extension so the back of the clamp is against the back of the saw fence. Tighten the clamp handles at back of the fence.
SHARE
