- 1). Locate the battery, which is under the rear passenger seat. To remove the seat, turn the clips on the seat until it can easily be lifted out of place.
- 2). Identify the negative battery cable, which will be black and marked with a minus sign.
- 3). Disconnect the clamp holding on the negative cable by using the adjustable wrench to loosen the bolt until the clamp can be removed.
- 4). Wait at least 30 seconds.
- 5). Reconnect the negative battery clamp on the battery terminal and tighten until the clamp is secure.
- 6). Start the vehicle to confirm the check engine light has gone off, indicating the codes have been cleared.
- 7). Reinstall the rear seat.
SHARE
