- 1). Clean your tin out thoroughly. Running it under the kitchen faucet and drying with a hand towel will work fine.
- 2). Massage the modeling clay in your hands until it is pliable. Because modeling clay is very stiff, this may take quite a bit of time.
- 3). Fill your tin with the modeling clay. Use your fingers to work out any bubbles. Make sure that the clay is even.
- 4). Set the tin on a flat surface and press your key into the clay. Make sure to apply even pressure. Using your thumbs will help to keep the pressure even.
- 5). Remove the key. The modeling clay will now hold and imprint of the key.
SHARE
