How to Repair the Chevy Blazer Instrument Cluster

Replacing the Instrument Cluster Fuse

1). Turn off the engine of the Blazer.
2). Remove the cover of the instrument panel fuse-block by rotating the plastic fastener on the cover to the left. Replacement fuses and the fuse extractor tool are located on the underside of the cover.
3). Use the fuse extractor to remove the fuse in slot 4. This is the instrument cluster fuse.
4). Install a replacement 15A fuse and reattach the cover to the instrument panel fuse-block.

1). Open the hood of the Blazer and, using a socket wrench, remove the negative battery cable.
2). Remove the two screws on the underside of the upper dash panel above the instrument cluster. Remove the upper dash panel.
3). Remove the two bolts securing the instrument cluster to the Blazer. Slide the cluster towards you and reach behind it to disconnect its electrical-connectors. Pull the cluster out of the vehicle.
4). Place the replacement cluster into the Blazer and reconnect the electrical-connectors. Reinstall the bolts and reattach the upper dash panel. Reconnect the battery.