- 1). Remove all five wires that are going into the SJ410 carburetor. These wires are for the throttle, PCV hose, cold choke tube, vacuum and the gas line. The throttle wire can be found near the bottom left of the SJ410 carburetor. Unscrew the four bolts on the bottom of the SJ410 carburetor with the allen wrench to remove it from the Suzuki.
- 2). Remove any plastic on the SJ810 carburetor. Soak the carburetor in a strong cleaning solvent and leave to soak overnight.
- 3). Wipe off the solvent with a rag while wearing rubber gloves. A strong cleaning solvent can be dangerous to sensitive skin. Spray a can of compressed air in to each hole of the SJ410 to clear out any particles of dirt left in the carburetor.
- 4). Reattach all the bolts and each wire into the carburetor. You should now have a healthy running and clean SJ410 carburetor.
SHARE
