- 1). Clean off the area on the bumper where the LED light bar is installed. Use soapy water and a sponge to clean. Let the area dry.
- 2). Drill out mounting screw holes on the bumper with the power drill. Screw the LED light bar to the bumper via the drilled out holes. Alternately, use double-sided adhesive tape provided with the LED light bar installation kit.
- 3). Plug the LED light bar connections into the light wire plugs if your truck or auto has a trailer hitch and light plugs. If it does not, align each colored wire on the LED light bar to the same colored wire at the truck or auto light cords near the center of the bumper. For example, twist and connect the green wire to the green, yellow to yellow and white to white.
- 4). Place a piece of black electric tape over the wires and crimp down.
SHARE