How to Stop a Samsung Washing Machine from Vibrating

Level

An unlevel surface might be the main reason why the washing machine is vibrating. Place a bubble level on the machine. See whether the machine is standing level from front to back and from side to side. If not, boost up the lowest end with wood shims. Or, place a 3/4-inch piece of plywood under both the washer and dryer to keep both machines at the same height. The floor beneath the washer also must be stable. Repair the floor if it is unstable before reinstalling the washing machine.

Remove all packaging material before operating the machine. Shipping bolts may still be connected to the washer if it is vibrating a lot. Remove them. The machine also has four feet that help keep it from vibrating. Check the feet, and verify that the jam nuts are tight. The weight of the washing machine should be evenly distributed on all four feet. Hold the washing machine diagonally and try moving it. Do this on both sides. If the washer moves even a little, it will vibrate during the washing cycle. Adjust the feet higher or lower until the washer is level.

Loading clothing properly also will help keep the washer from shaking. Open the washer's lid to stop the machine and redistribute the load around the agitator when the machine shakes during the spin cycle. Do not overload the washer. Remove a few items if you suspect this is the reason for the machine shaking. Balance heavy and light clothing. If you are washing a large, bulky item, add a few smaller items. If your load is too small, add a few towels to even out the load.

Always allow enough clearance around the washing machine. The washer might knock against an object, causing a lot of noise. Stop the washer when you hear rattling inside the machine. Remove loose items such as coins or buttons. Gurgling and humming noises are normal for the machine.