- 1). Drive the Venture onto a set of ramps to raise the front of the vehicle off the ground. This step is not required, but it makes getting your head and torso under the front of the vehicle easier. Set the parking break for added safety if you do place the Chevy on ramps.
- 2). Slide under the Venture so you can see the headlight enclosure. Locate the wiring harness that extends away from the headlight enclosure to the edge of the vehicle. That harness connects to the corner light bulb.
- 3). Turn the bulb connector that connected to the back of the corner light enclosure counterclockwise and pull the connector out of the enclosure.
- 4). Pull the old bulb out of the connector and push the new bulb into the connector.
- 5). Put the connector back into the corner light enclosure and turn it clockwise to lock it in place.
SHARE
