- 1). Open the hood and loosen the retaining nut connected to the battery cable clamp that is attached to the negative battery terminal.
- 2). Slide the negative battery cable clamp off the battery terminal.
- 3). Wait five seconds then slide the battery cable clamp back over the negative battery terminal. The Dodge's computer will now be reset.
- 4). Tighten the retaining nut on the cable clamp to secure the clamp to the battery. On some Dodge trucks, you will need to drive an additional 500 miles from the time you cut power to the computer for the Dodge's computer to fully reset.
SHARE
