- 1). Sit below a nerf bar on one side of the truck. Unscrew the two bolts in the front bracket and the two in the rear bracket on the nerf bar. Use the proper sized sockets.
- 2). Pull the nerf bar off of the truck frame. Pull off the rubber washers from each of the bracket or the truck frame if they happened to corrode into place.
- 3). Open the new nerf bar kit. Set the rubber washers into place on the new nerf bar brackets.
- 4). Push the new nerf bar into the place of the old one and tighten all six bolts back trough the nerf bar brackets and into the truck frame.
- 5). Repeat Steps 2 through 6 on the other side of the truck.
SHARE