- 1). Crawl under the truck and use the socket set to loosen and remove the lag bolts holding the truck bed to the cross-members of the frame. Have someone assist in lifting the bed free from the frame and laying it somewhere for disposal.
- 2). Cut one of the decking boards in half and then use the lag bolts to bolt the two halves lengthwise across the pickup frame. Lay the other decking boards side by side on top of the lengthwise boards and screw them down tightly with the wood screws.
- 3). Mount your taillights and bumper on the rear of the bed with the hardware provided in your lighting kit and hang your license plate on the rear middle section of the bed.
SHARE
