- 1). Unplug the power cable from the rear of your 2Wire modem, and unplug any peripheral cables, such as Ethernet or USB cables.
- 2). Insert the tip of your flat head screwdriver into the seam where the side panel meets the body of the unit.
- 3). Work your way around each side of the panel with the screwdriver, prying up on the case as you go.
- 4). Continue to work your way around until the panel pops off the unit. The case is now removed and you have full access to all internal components of the 2Wire modem, such as the motherboard.
SHARE