What is the most cost effective way of building stairs? Why do the tract homes use on site methods of construction? When you think of a factory assembling a product on a assembly line you think why not a home.
Why do they still build homes on lots or residential home sites? If homes could be built in a factory cheaper than on site that is exactly what every home builder would be doing.
They just haven't quite figured it out yet.
When dealing with the large amounts of materials required to build a house and of course the expense of shipping.
It is not cost effective to build a conventional home in a factory and ship it over long distances.
This is the biggest problem with cost effective stair construction.
Most prefabricated stairs you will notice are spiral stairs.
These stairs are smaller than most stairs that are used for multi level construction.
Spiral stairs are hard for your average carpenter to build.
These stairs can be purchased from a factory easily and quite inexpensive.
The stairs in your average two story house are going to weigh about 3 times the amount of a spiral set of stairs that could be shipped in a cost effective way.
Spiral stairs are not going to be the main stairway in a home and normally go up to a loft or an attic.
Most spiral stairs don't meet the minimum building requirements for the main stairway in your home.
When building tract homes the lumber is shipped in bulk directly to the house site where it will be assembled.
The lumber and other building materials will be shipped once.
If it went to a factory and then assembled it would also have to be sent to the site on which the house was to be built.
This added expense in shipping the materials twice is the problem for such a large and heavy item such as a set of stairs.
There are other prefabricated types of stairs that are built locally and the shipping usually is not a major expense.
If you are building a stairway that is not to difficult to build for the average carpenter it will normally be cost effective to build the stairs on site.
This would require having the carpenter build the stairs as part of the rough framing and then after drywall have the finish carpenter build the stair handrail system.
Why do they still build homes on lots or residential home sites? If homes could be built in a factory cheaper than on site that is exactly what every home builder would be doing.
They just haven't quite figured it out yet.
When dealing with the large amounts of materials required to build a house and of course the expense of shipping.
It is not cost effective to build a conventional home in a factory and ship it over long distances.
This is the biggest problem with cost effective stair construction.
Most prefabricated stairs you will notice are spiral stairs.
These stairs are smaller than most stairs that are used for multi level construction.
Spiral stairs are hard for your average carpenter to build.
These stairs can be purchased from a factory easily and quite inexpensive.
The stairs in your average two story house are going to weigh about 3 times the amount of a spiral set of stairs that could be shipped in a cost effective way.
Spiral stairs are not going to be the main stairway in a home and normally go up to a loft or an attic.
Most spiral stairs don't meet the minimum building requirements for the main stairway in your home.
When building tract homes the lumber is shipped in bulk directly to the house site where it will be assembled.
The lumber and other building materials will be shipped once.
If it went to a factory and then assembled it would also have to be sent to the site on which the house was to be built.
This added expense in shipping the materials twice is the problem for such a large and heavy item such as a set of stairs.
There are other prefabricated types of stairs that are built locally and the shipping usually is not a major expense.
If you are building a stairway that is not to difficult to build for the average carpenter it will normally be cost effective to build the stairs on site.
This would require having the carpenter build the stairs as part of the rough framing and then after drywall have the finish carpenter build the stair handrail system.
SHARE
