- 1). With the watch attached to your wrist, grip the bezel at the three o'clock and nine o'clock points and slowly twist counterclockwise.
- 2). Move the large arrow from the top of the watch bezel to match the current position of the minute hand. This will begin timing your dive once the arrow and hand match.
- 3). Begin timing by comparing the placement of the minute hand with the numbers printed on the bezel, not the numbers printed on the face of the watch. The bezel indicates minutes elapsed since the bezel was set.
- 4). When the dive is complete (or other timing is done) simply grip the bezel as in step 1 and rotate around the watch until the arrow once again lines up with the 12 o'clock marker.
SHARE
