Disable the Switch

• 1). Lift the seat of the mower up so you can access the switch that is wired to the bottom.
  
  
• 2). Unplug the switch from the socket that is on the seat.
  
  
• 3). Cut the insulation off the ends of a small length of wire with the wire cutters.
  
  
• 4). Bend the wire into a "U" shape and plug the wire into the switch.
  
  
• 5). Wrap electrical tape around the switch to keep the wire connected.
  
  

Connecting the Wires

• 1). Life the seat of the mower up so you can access the switch that is wired to the bottom.
  
  
• 2). Cut the electrical wires from the switch with the wire cutters. Remove about ½ inch of insulation from the end of each wire.
  
  
• 3). Twist the wires together and then cover the wires with a wire cover or electrical tape.