Home & Garden Personal Safety & Security

Do Smoke Detectors Need to Be Replaced?

    Failure

    • Smoke alarm failure is most frequently linked to either missing, disconnected or dead batteries. Many times people remove the batteries or disconnect the detector from a built-in system by cutting the wires if the alarm gets set off when they are cooking.

    Batteries

    • Batteries should be replaced in your smoke alarms frequently. Experts from the NFPA recommend that you replace batteries at a minimum of once a year, but adhere to the manufacturers' instructions if they require that you do it more often. Many people recommend that you do it every time you change your clocks for daylight savings time, so you don't forget. Your smoke alarm should also "chirp" when the battery is low.

    Alarm Placement

    • Avoid placing smoke detectors against outside walls if possible, since the colder air in winter has the potential to cause them to fail in the event of a fire. The NFPA also recommends that you create a smoke detector system that will sound all alarms when one goes off. To prevent false alarms, keep the detectors at least 20 feet from furnaces and ovens, 10 feet from areas of high humidity, such as showers, and 3 feet from heating and air conditioning vents.

    Alarm Replacement

    • All smoke alarms will need to be replaced at some time or another. Test your alarm once a month using the test button, and replace it if the test fails. Replace all detectors anyway every 10 years, as recommended by the NFPA and leading manufacturer of smoke detectors in the United States, Some manufacturers may call for replacing them more often. If you're moving into a new home, ask the previous owner or tenant about the last time the alarms were replaced.

    Reasons for Failure

    • The sensing chamber inside the smoke alarm detects smoke particles, not heat or flames, and its sensitivity may decrease over time. Richard Bukowski, a manager at the Center for Fire Research, led a study which discovered that fire detectors fail at a rate of 3 percent each year. Painting on a smoke detector can also render it dysfunctional, since the paint may clog the smoke entry holes and possibly damage the inner circuitry.

SHARE
RELATED POSTS on "Home & Garden"
Led Emergency Lights - What All Emergency Vehicles Need
Led Emergency Lights - What All Emergency Vehicles Need
Homemade Grub Control
Homemade Grub Control
Choosing a Burglar Alarm Systems
Choosing a Burglar Alarm Systems
How to Organize a Raised Outdoor Storage
How to Organize a Raised Outdoor Storage
A Low Cost Monitored Home Security System Can Save Your Life
A Low Cost Monitored Home Security System Can Save Your Life
Inexpensive Do It Yourself Home Security Tips
Inexpensive Do It Yourself Home Security Tips
How Smart Homes Make Life Easier
How Smart Homes Make Life Easier
Why Many People Choose Wireless Security Cameras
Why Many People Choose Wireless Security Cameras
GE - The Home Security System You Can Trust
GE - The Home Security System You Can Trust
The Most Energy-Efficient Form of Locomotion
The Most Energy-Efficient Form of Locomotion
Buying Columbus Barbecue Supplies for the House
Buying Columbus Barbecue Supplies for the House
The 5 Things Which Equal Strong Home Security in Nashville
The 5 Things Which Equal Strong Home Security in Nashville
Owning A Handgun Safe Shows How Responsible You Are
Owning A Handgun Safe Shows How Responsible You Are
Locksmith San Leandro
Locksmith San Leandro
How to Kill Weeds in a Pasture But Not the Grass
How to Kill Weeds in a Pasture But Not the Grass
Parts of a Block and Tackle
Parts of a Block and Tackle
How to Get Little Bugs Out of a Swimming Pool
How to Get Little Bugs Out of a Swimming Pool
Home Security- Driveway Alarm
Home Security- Driveway Alarm
The Best Motion Light SD Cameras
The Best Motion Light SD Cameras
How to Get Rid of Wood Ants
How to Get Rid of Wood Ants

Leave Your Reply

*