- 1). Park your Harley in a flat, accessible area. Be sure that the motorcycle is very stable on its kickstand.
- 2). Remove the mounting bolt on top of the shifter shaft using a 12mm socket wrench. This bolt may be tight, so be ready to use some force, if needed.
- 3). Slide the shifter off the shaft. If the lever doesn't want to slide, try twisting it back and forth as you slide it off the shaft.
- 4). Slide the replacement shifter onto the shaft at the angle desired. The toothed shaft will match with the full radius of the mounting hole on the shifter.
- 5). Replace the mounting bolt on the top of the shifter assembly. Tighten down the bolt to prevent possible slipping.
SHARE
