- 1). Clear and level area to be paved.
- 2). Mix concrete mix and water in wheelbarrow or large pail according to directions. Add one-half bottle of liquid color per bag of concrete mix. Mix well.
- 3). Position paver mold on paving area. Fill mold with concrete. Smooth with wooden trowel, being careful to remove air pockets. Remove excess concrete. Remove mold. Smooth edges of stones using trowel or brush for a more realistic look.
- 4). Brush some stones lightly with dark-colored powder and others with light-colored powder to simulate real cobblestones. Leave some stones the original color.
- 5). Repeat Steps 3 and 4 until entire area is paved. Allow stones to cure for at least a week before walking on them.
SHARE
