Second, CTP plate developments On the development of the natural CTP equipment can not only discuss the expense of progress on the plate, in fact, CTP plate technology equipment rate no better than poor. Internationally, Kodak, Agfa and Fuji film (Fujifilm) is a traditional offset printing plate manufacturing top three. Offset printing plate technology shift from traditional digital technology, the three remained his strong leadership. The Presstek, Printware and other enterprises, the production of materials in the field of the digital version, but also enjoy a high market position. In 2006, these businesses have a new product launch CTP plate, and many new plate is defined as the upgrading of enterprise products. Therefore, said the 2006 CTP plate manufacturing enterprises "upgrade", with not too much.
From a technical point of view, new in 2006 the main plate efficiency, is free of chemical processing (chemistry-free) or free wash (processless, also translated as free contrast in). Either in thermal or violet laser field area, there are many such products appeared. The emergence of such plates, further reducing the pre-press plate-making process areas, but also indirectly help to reduce such as maintenance, an area such as the cost of such plates hopefully play a leading role in the future.
CTP equipment and domestic and international advanced level compared to the huge gap between the domestic CTP plate manufacturing in the gap to be smaller, which the Chinese plate manufacturing industry has reached a certain size are closely relationship. At present, China's version of material manufacture are international already has a certain position in the market, while several top plate manufacturers, including Lucky Group Second Film Factory, Fuji Star, Sichuan torch light, etc., in the CTP technology also through different channels to obtain a significant development. In 2006, these enterprises have introduced new CTP plate.
1. Kodak Launch its device's low compared to Kodak in CTP plate side is fully shown leadership style. In 2006, Kodak thermal and photosensitive in the two areas were re-introduced the first product. Among them, the thermal plate This new product is KODAKTHERMAL DIRECT non process plate (Non Process PrintingPlate), the photosensitive area is photopolymerization violet type KODAK VIOLET PRINT Digital Plate. Kodak KODAK THERMALDIRECT
chemistry-free thermal CTP plate using the traditional aluminum substrate, and the traditional way of processing and surface oxidation of sand present, so the plate in appearance very traditional PS version similar. As the fourth generation of thermal plates, THERMALDIRECT chemistry-free plates were washed and completely without chemical treatment, not only save time and plate-making results more consistent. Moreover, we note that, THERMALDIRECT chemistry-free plate can use any kind of market exposure thermal CTP devices, and can adapt to a lot of ink and fountain solution.
Present, THERMALDIRECT chemistry-free plates are off and the plates off the supply of the following format can be used in short runs and high-resolution printing. Such plates are particularly suitable for high country on environmental protection requirements, as well as those covering an area of small businesses, because the use of such plates do not have to buy plate processor, also no longer need to reserve chemicals.
The standard printing conditions, THERMALDIRECT chemistry-free plate of anti-Indian rate of 100 000 India. The resolution adopted 200lpi can guarantee 1% ~ 98% of a homogeneous network; in 175lpi resolution, it can restore the 1% to 99% of the network. This plate also supports 25-micron FM screening.
KODAK THERMALDIRECT thin plate of light-sensitive coating, the thickness of polymer-based violet laser than the thin plate 70% thinner than conventional thermal plates, 35%. The sensitive range of 800 ~ 850nm, the energy required for the 325mJ/cm 2. As a result of special light-sensitive material, so that plates do not remove the residue after exposure.
Moreover, THERMALDIRECT chemistry-free plate of light-sensitive layer of very little colorant added, so the layout plate decreased risk of contamination. In the printing process, this plate layout is always kept clean and clear graphics. This plate in yellow can be safely placed under the protection of 4 hours, the fluorescent lamp can be safely placed under 1 hour. In an appropriate environment, this plate shelf for 18 months.
From a technical point of view, new in 2006 the main plate efficiency, is free of chemical processing (chemistry-free) or free wash (processless, also translated as free contrast in). Either in thermal or violet laser field area, there are many such products appeared. The emergence of such plates, further reducing the pre-press plate-making process areas, but also indirectly help to reduce such as maintenance, an area such as the cost of such plates hopefully play a leading role in the future.
CTP equipment and domestic and international advanced level compared to the huge gap between the domestic CTP plate manufacturing in the gap to be smaller, which the Chinese plate manufacturing industry has reached a certain size are closely relationship. At present, China's version of material manufacture are international already has a certain position in the market, while several top plate manufacturers, including Lucky Group Second Film Factory, Fuji Star, Sichuan torch light, etc., in the CTP technology also through different channels to obtain a significant development. In 2006, these enterprises have introduced new CTP plate.
1. Kodak Launch its device's low compared to Kodak in CTP plate side is fully shown leadership style. In 2006, Kodak thermal and photosensitive in the two areas were re-introduced the first product. Among them, the thermal plate This new product is KODAKTHERMAL DIRECT non process plate (Non Process PrintingPlate), the photosensitive area is photopolymerization violet type KODAK VIOLET PRINT Digital Plate. Kodak KODAK THERMALDIRECT
chemistry-free thermal CTP plate using the traditional aluminum substrate, and the traditional way of processing and surface oxidation of sand present, so the plate in appearance very traditional PS version similar. As the fourth generation of thermal plates, THERMALDIRECT chemistry-free plates were washed and completely without chemical treatment, not only save time and plate-making results more consistent. Moreover, we note that, THERMALDIRECT chemistry-free plate can use any kind of market exposure thermal CTP devices, and can adapt to a lot of ink and fountain solution.
Present, THERMALDIRECT chemistry-free plates are off and the plates off the supply of the following format can be used in short runs and high-resolution printing. Such plates are particularly suitable for high country on environmental protection requirements, as well as those covering an area of small businesses, because the use of such plates do not have to buy plate processor, also no longer need to reserve chemicals.
The standard printing conditions, THERMALDIRECT chemistry-free plate of anti-Indian rate of 100 000 India. The resolution adopted 200lpi can guarantee 1% ~ 98% of a homogeneous network; in 175lpi resolution, it can restore the 1% to 99% of the network. This plate also supports 25-micron FM screening.
KODAK THERMALDIRECT thin plate of light-sensitive coating, the thickness of polymer-based violet laser than the thin plate 70% thinner than conventional thermal plates, 35%. The sensitive range of 800 ~ 850nm, the energy required for the 325mJ/cm 2. As a result of special light-sensitive material, so that plates do not remove the residue after exposure.
Moreover, THERMALDIRECT chemistry-free plate of light-sensitive layer of very little colorant added, so the layout plate decreased risk of contamination. In the printing process, this plate layout is always kept clean and clear graphics. This plate in yellow can be safely placed under the protection of 4 hours, the fluorescent lamp can be safely placed under 1 hour. In an appropriate environment, this plate shelf for 18 months.
SHARE
