Vacuum cleaners are always subjected to hours of rigorous household cleaning.
Most homeowners would even say that they do not pay attention to proper vacuum cleaner usage for as long as they get the job done.
Most vacuum appliance damages are experienced during your cleaning spree.
That being said, you can avoid numerous vacuum problems if you know how to use this machine properly.
If you don't have to time to browse over the manual, check out the following tips: Tip 1: Plug the machine properly.
For those cleaners with wide prongs, do not force the prongs to fit in the outlet.
Use an adapter so it can fit better.
Avoid using extension cords as well.
Extension cords tend to cut the flow of energy transferred to the cleaner.
This might lessen the efficiency and the suction power of the vacuum.
Tip 2: Do not pick up spilled food or wet objects.
This can easily make the inside of your vacuum smelly and moldy.
Only pick up dry objects.
Tip 3: Do not pick up sharp and big objects such as rocks or pebbles.
Small toys should be removed first before you vacuum the floor.
These objects might damage the interior suction system of the machine.
Tip 4: Do not strain the cord of the cleaner.
Unplug the machine and plug it to an outlet closer to the area you are cleaning.
This will avoid damages to the cord and to the plug of this cleaning appliance.
Tip 5: Make sure you dispose the collected dirt once the bag or the dirt compartment has been filled up with 3/4 of dirt.
Do not wait for it to overspill.
If you are using a bagless cleaner, take your cleaning appliance outside and remove the compartment.
Dispose the contents in the trash bin neatly.
Tip 6: Attach the brushes properly.
Do not turn it on if the brushes are not connected tightly.
Do not connect the brushes too tightly either as this might damage the rubber seal inside.
Before fully operating the machine after attaching the brush, try it for a few minutes first to make sure that it will not come off the body of the cleaner.
Tip 7: Avoid bumping your cleaner.
Use the appropriate brushes and attachments especially when cleaning narrow and hard-to-reach places.
Do not force the machine to clean the places it cannot reach.
Tip 8: Store your vacuum in a proper place, away from moist or wet areas.
Let the motor cool down first before storing it back to its proper place.
Most homeowners would even say that they do not pay attention to proper vacuum cleaner usage for as long as they get the job done.
Most vacuum appliance damages are experienced during your cleaning spree.
That being said, you can avoid numerous vacuum problems if you know how to use this machine properly.
If you don't have to time to browse over the manual, check out the following tips: Tip 1: Plug the machine properly.
For those cleaners with wide prongs, do not force the prongs to fit in the outlet.
Use an adapter so it can fit better.
Avoid using extension cords as well.
Extension cords tend to cut the flow of energy transferred to the cleaner.
This might lessen the efficiency and the suction power of the vacuum.
Tip 2: Do not pick up spilled food or wet objects.
This can easily make the inside of your vacuum smelly and moldy.
Only pick up dry objects.
Tip 3: Do not pick up sharp and big objects such as rocks or pebbles.
Small toys should be removed first before you vacuum the floor.
These objects might damage the interior suction system of the machine.
Tip 4: Do not strain the cord of the cleaner.
Unplug the machine and plug it to an outlet closer to the area you are cleaning.
This will avoid damages to the cord and to the plug of this cleaning appliance.
Tip 5: Make sure you dispose the collected dirt once the bag or the dirt compartment has been filled up with 3/4 of dirt.
Do not wait for it to overspill.
If you are using a bagless cleaner, take your cleaning appliance outside and remove the compartment.
Dispose the contents in the trash bin neatly.
Tip 6: Attach the brushes properly.
Do not turn it on if the brushes are not connected tightly.
Do not connect the brushes too tightly either as this might damage the rubber seal inside.
Before fully operating the machine after attaching the brush, try it for a few minutes first to make sure that it will not come off the body of the cleaner.
Tip 7: Avoid bumping your cleaner.
Use the appropriate brushes and attachments especially when cleaning narrow and hard-to-reach places.
Do not force the machine to clean the places it cannot reach.
Tip 8: Store your vacuum in a proper place, away from moist or wet areas.
Let the motor cool down first before storing it back to its proper place.
SHARE
