- 1). Attach the seat to the seat ring by sliding the wheels on the seat into the wheel holders on the seat ring. Turn the seat right side up and snap the tabs of the pad over the pegs on the seat ring.
- 2). Insert the seat ring into the center of the tray, pushing until it snaps firmly.
- 3). Place the three lower leg pieces into the base of the ExerSaucer, aligning the slots and snapping them until they lock.
- 4). Turn the tray upside down and snap the three upper leg portions of the legs into the underside of the tray. Twist the leg pieces and make sure that the buttons for adjusting the height face outward from the ExerSaucer.
- 5). Hold the tray so the upper leg portions hang straight down. Insert a spring into the hole created for the springs in each upper leg and then push in a yellow curved piece to compress the springs in each leg. Turn the pieces clockwise until they lock.
- 6). Push the upper leg pieces into the lower leg pieces and snap them securely.
- 7). Insert the toys around the tray in the proper places.
- 8). Place your baby into the seat and situate him comfortably. Check the height of the ExerSaucer to see whether it needs to be higher or lower. The baby's toes should just touch the base. Raise or lower the legs by pushing the yellow buttons on the legs; always remove the baby from the ExerSaucer before adjusting the height.
SHARE
