- 1). Attach one wheel to each leg of the end panels, using a bolt and a knob. The knobs go inside and the square hole of the wheel goes on the outside, allowing the head of the bolt to lock into place.
- 2). Attach the two rails to one end panel using two long bolts. The grooves should be facing inside. Slide the shelf into the grooves with the warning label facing toward the sky.
- 3). Attach the second end panel to the two rails using two long bolts. Turn the body of the bassinet upside down and then place the stand on top of the body of the bassinet.
- 4). Align the four holes on the end panels with the four holes on the bassinet body. Secure the L-shaped brackets on the inside with eight medium bolts on the end panels.
- 5). Connect eight short bolts to the bassinet body to the L-brackets. When the stand is firmly connected to the body, turn the bassinet back over.
- 6). Wrap the fabric skirt around the base of the bassinet body and connect with the grip tape.
- 7). Insert the metal spindle to the metal canopy hole on models that have a canopy. Use the push button on the canopy pole to snap securely into place.
- 8). Insert the ends of the canopy frame into the top of the canopy pole and tap gently with a hammer until securely attached.
- 9). Place the fabric canopy onto the frame and secure the ribbons. Insert the mattress and attach the bumpers inside the bassinet, if applicable.
- 10
Check the hardware closely to make sure everything is tight and no ends are loose or sticking out. Wipe down the bassinet with a clean, damp cloth to remove any dust or dirt.
SHARE
