- 1). Remove the tent from the stuff sack and lay the tent with the floor on the ground. Spread out the materials and pull on each corner to tighten the floor.
- 2). Assemble the two main poles by connecting the ferrules for each section. Slide the two poles through each sleeve on the tent body. Place the pin on each corner of the tent into the metal ferrule on the end of each corresponding tent pole. This will flex the poles and pitch the tent.
- 3). Attach the clips on the tent body to the tent poles. Use a mallet or rock to pound stakes through the corner ground loops. Set the stakes at an angle to help bypass rocks and obstacles.
- 4). Drape the rain fly on top of the tent. Align the corners and attach the clips on the interior of the fly to the poles. Attach the hook on each corner fly strap to the ring at the corner of the tent body. Stake the fly on tent models with a vestibule.
- 5). Assemble the small fly poles and models without the vestibule. Insert each end of the poles into the sleeves located on the roof peak. There is one peak over the door and one over the back of the tent.
SHARE