How to Repair the Ear Piece on Your Glasses

Assess the Damage

1). Inspect the glasses to determine the damage. If the earpiece is intact, but is no longer attached to the frame (or is loose), skip to Section 2. If the earpiece is broken completely (not just cracked) or is missing, continue to Step 2.
2). Contact a retailer of eyeglasses parts to find a suitable earpiece, also know as eyeglasses temple tips, for the current earpiece for the frame.
3). Purchase two matching earpieces and replace them both using the procedure below. In the event that the earpiece is damaged and replacement is not possible, try to repair the earpiece using the procedure below as a temporary solution only.

1). Ensure that affected surfaces on the earpiece and frame are clean and dry. If necessary, wash the earpiece and frame with soap and water and dry thoroughly before starting. Oils or debris from skin can interfere with adhesive bonding.
2). Place a drop of glue onto the surface of the area where the frame meets the earpiece, and hold in place for a few seconds while it sets. Be sure not to apply too much glue at once. Doing so may cause the glue to run, making it more difficult to control application. As an optional step, use a toothpick to spread the glue evenly before it sets.
3). Repeat Step 2, in order to apply additional layers of adhesive as needed. If the earpiece is cracked, use the glue and toothpicks to fill the crack and remove excess glue.
4). Allow bonding to set for at least 30 minutes before attempting to wear the glasses. Using glasses too soon can compromise the adhesive bond.